Web Operation | 179
800-18160 - B - 07/2014
Configuring for Camera Masking
You can configure the system to generate a camera masking alarm when the minimum amount
of masking (as defined by you) is detected in the video.
Click Camera Masking in the Event configuration interface to open the Camera Masking
configuration interface.
Figure 5-42 Camera Masking Configuration Interface
The configuration for Camera Masking Detection is very similar to the configuration for Motion
Detection. Please see Configuring for Motion Detection on page 174 for more information.
Configuring Alarms
Before configuring alarms, ensure that you have properly connected alarm devices such as a
buzzer. You can configure local and network alarms.
Click Alarm in the Event configuration interface to open the Alarm configuration interface.
Configuring Local Alarms
Click Local Alarm in the Alarm configuration interface to open the Local Alarm configuration
interface.
To Next Page
Loading...
Need help?
General