www.honeywell.com/security
148 | Performance Series Network Video Recorder User Guide
Figure 5-12 Image Settings
Note All of these configurations apply only to the Web viewer.
Configuring Alarm Output
1. Click to open the Alarm Out configuration interface.
Figure 5-13 Alarm Out Configuration Interface
2. Disable/enable the alarm signal for the corresponding port.
Playing Back Recorded Video
1. Click the Playback tab at the top of the Main window.
The Playback interface appears.
Table 5-5 Image Settings
Setting Description
Adjusts the monitor’s video brightness.
Adjusts the monitor’s video contrast.
Adjusts the monitor’s video hue.
Adjusts the monitor’s video saturation.
Restores the system to its defaults value.
To Next Page
Loading...