Web Operation | 191
800-18160 - B - 07/2014
Figure 5-56 General Settings
General Settings
Date & Time Settings
Click the Date & Time tab in the General settings configuration interface to open the Date &
Time configuration interface.
Table 5-23 General Settings Configurations
Configuration Description
Device Name Enter a device name.
Device No. Enter a channel number.
Language Select a GUI language from the drop-down list.
Note You need to reboot the device/NVR to activate this
change.
Video Standard Select the video standard, either NTSC or PAL.
HDD Full Select what happens when the NVR’s storage is full. Select
either Stop Recording or OverWrite.
Stop Recording: If the HDD is full, the NVR stops recording.
OverWrite: If the currently working HDD is full and the next
HDD is also full, the NVR overwrites the previous files.
Pack Duration Select the recording duration. Select from 1 to 120 minutes.
The default is 60 minutes.
To Next Page
Loading...
Need help?
General