www.honeywell.com/security
164 | Performance Series Network Video Recorder User Guide
Figure 5-30 CDMA/GPRS Configuration Interface
Configuring the Mobile Setup for 3G
Click the Mobile Setup tab in the Network Configuration interface to open the Mobile Setup
configuration interface.
Table 5-13 CDMA/GPRS Configurations
Configuration Description
WLAN Type Select a 3G network type to distinguish this 3G module from
different ISPs. Choose from WCDMA, CDMA1x, for example.
APN & Dial No. APN and the Dial No. are important PPPoE parameters. The
APN (Access Point Name) and the Dial No. are automatically
received by the NVR after connecting to a 3G module.
AUTH Authorization. Choose from PAP, CHAP, or NO_AUTH.
Pulse Interval Configure a time for ending the 3G connection after you close
the extra stream monitor. For example, if you select 60 here,
the NVR ends the 3G connection 60 seconds after you close
the extra stream monitor.
Note If the Pulse Interval is 0, then the system does not end the 3G connection after you
close the extra stream monitor.
Note The Pulse Interval here is for the extra stream only. This field is inactive if you are
using a main stream monitor.
To Next Page
Loading...
Need help?
General