www.honeywell.com/security
182 | Performance Series Network Video Recorder User Guide
Configuring Net Alarms
Configure Network Alarms so that the NVR can detect alarm signals from the network. The
system does not support anti-dither and sensor type setup.
Click Net Alarm in the Alarm configuration interface to open the Net Alarm configuration
interface.
Figure 5-44 Net Alarm Configuration Interface
The configuration for Net Alarms is very similar to the configuration for Local Alarms. Please
see Configuring Local Alarms on page 179 for more information.
Configuring External Alarms
Configure the External Alarms so that the NVR can detect alarm signals from the IP cameras.
The system does not support anti-dither and sensor type setup.
Click IPC External Alarm in the Alarm configuration interface to open the IPC External Alarm
configuration interface.
To Next Page
Loading...