www.honeywell.com/security
80 | Performance Series Network Video Recorder User Guide
Figure 3-34 UPNP Configuration Interface
Double-click the UPnP item in the list to configure it. A configuration window appears.
Table 3-18 UPnP Configurations
Parameter Function
UPnP On/Off Turn On or Off the UPnP function.
Status Displays Unknown when the UPnP is offline. Displays
Success when the UPnP is working.
Router LAN IP The router IP in the LAN.
WAN IP The router IP in the WAN.
Port Mapping list (PAT
Table)
This is the one-to-one relationship with the router’s port
mapping setting.
Enable Switch A check mark
in the box ❐ indicates that port mapping is
enabled for this port.
List Service Name: Defined by the user.
Protocol: The protocol type.
Internal port: The port that has been mapped in the router.
External port: The port that has been mapped locally.
Default Click to restore the UPnP default port settings, which is the
HTTP, TCP, and UDP for the NVR.
Add to the List Click to add the mapping relationship.
Delete Click to remove a mapping item.
To Next Page
Loading...