NVR Configurations | 85
800-18160 - B - 07/2014
Configuring the FTP Settings
You need to download or buy an FTP service tool (such as Ser-U FTP SERVER, used as an
example below) to have FTP service.
Installing the
FTP service tool
1. Go to Start
ProgramServ-U FTP SERVERServ-U Administrator.
Figure 3-40 Configuring FTP
Receiver Enter the receiver’s email address. You can enter up to 3 email
addresses.
SSL enable The NVR supports an SSL encryption box.
Event Interval The interval for sending ranges from 0 to 3600 seconds. 0
means that there is no interval.
Health email enable Click to enable the email health check. The NVR sends a test
email to check the network connection.
Interval After enabling Health Enable, you can configure how
frequently the NVR sends out emails to test the network
connection.
Click Test to send a test email. A popup message appears to
indicate the state of the network connection.
Table 3-20 Email Configurations
Parameter Description
To Next Page
Loading...
Need help?
General