Web Client Operation
223
Figure 12-99 Add User Configuration Interface
Modifying a User
1. Click under Modify to open the Modify User configuration interface.
Figure 12-100 Modify User Configuration Interface
2. Change the settings, then click OK.
Modifying a Password
1. Click Modify Password in the Modify User configuration interface.
2. Enter the old Password, then enter the new Password twice.
3. Click OK to save the new password.
Note
Passwords can have up to 6 characters, numbers only. Users with admin rights
can modify the password of other users.
To Next Page
Loading...
Need help?
General
