Honeywell 35 Series Network Video Recorder User Guide
11
No. Name Description
4 AUDIO IN
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as microphone,
pickup.
5 VGA
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
6 HDMI
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
7 ALARM I/O
They receive signals from external alarm source. C is COM
port. There is one channel of alarm in; There are eight
channels of alarm out.
When your alarm input device is using external power,
make sure the device and the NVR have the same GND.
8 Power input port Power socket.
9 Power switch Power on/off button.
10
GND
Mouse Operation
Refer to the following sheet for mouse operation instruction.
Table 12 Mouse Operation Instruction
Operation Description
Left click
mouse
When you have selected one menu item, left click mouse to view menu
content.
Modify checkbox or motion detection status.
Click combo box to pop up drop-down list
In input box, you can select input methods. Left click the corresponding
button on the panel you can input numeral/English character (lower
case/upper case). stands for space button, stands for
deleting the previous character. switch the case and special
character, as shown in figure.
Double left click
mouse
Implement special control operation such as double click one item in the
file list to playback the video.
To Next Page
Loading...