Honeywell HN35160200 - Getting Started with the NVR; Connecting External Devices

CHAPTER
13
Performance Series Embedded NVR User Guide
2 GETTING STARTED
This chapter contains the following sections:
• Unpacking the NVR, page 13
• Connecting External Devices, page 13
• Starting and Shutting Down the NVR, page 17
• Device Initialization, page 18
• Resetting Password, page 24
• Two-way Talk, page 26
Unpacking the NVR
Before you set up the NVR, make sure that you have received the following
items:
• Quick Installation Guide
• Power adapter and cable
• Quick Certificate Installation
Guide
• Terminal block connectors (
The
actual product shall prevail.)
• Mouse
• Screws
If any of the items listed above are missing or damaged, contact your
Honeywell dealer immediately.
Connecting External Devices
1. Connect the cameras
Connect the network cables from the cameras to the PoE port (The NVR
need to support PoE port) or router.
Note:
The router cannot be directly connected to the PoE port.
2. Connect the monitor