Honeywell 35 Series Network Video Recorder User Guide
79
Date And Time
1. Go to Main Menu > System > General > Date And Time.
Figure 99 Date and Time
2. Configure the settings for date and time parameters.
Table 28 Data and Time Parameters
Parameter Description
Date format Select a date format for the system.
Time format Select 12H or 24H for the time display style.
Enable NTP
Enable the NTP function to sync the Device time with the NTP
server.
If NTP is enabled, device time will be automatically
synchronized with server.
NTP server Choose the NTP server to synchronize.
Sync time
frequency (sec)
Sync the NTP server for the setting time.
Do not change the system time randomly; otherwise the
recorded video cannot be searched. It is recommended to avoid
the recording period or stop recording first before you change
the system time.
Date (Time)
If user don’t enable the sync time, you can modify the Date (Time)
manually.
3. Click APPLY to save settings.
Time Zone
1. Go to Main Menu > System > General > Time zone.
To Next Page
Loading...