Honeywell 35 Series Network Video Recorder User Guide
74
Parameter Description
Trap port The write community only can read data.
Trap community IP address of the trap.
SNMPV3 Management port of accepting message from trap.
Read security name community string of trap.
Write security name The trap community string allows the manager to receive
asynchronous information from the agent.
Security level Version of SNMP.
Auth algorithm SNMPv3 uses community strings, but allows for secure
authentication and communication between SNMP manager and
agent.
Auth password Name of read security.
Encry algorithm Name of write security.
Encry password Security Level between SNMP manager and agent, includes three
levels:
3. Compile the two MIB files by MIB Builder.
4. Run MG-SOFT MIB Browser to load in the module from compilation.
5. On the MG-SOFT MIB Browser, enter the Device IP that you want to
manage, and then select the version number to query.
6. On the MG-SOFT MIB Browser, unfold the tree-structured directory
to obtain the configurations of the Device, such as the channels
quantity and software version.
Network Traffic
At the Network Traffic interface, you can view the send rate and receive
rate. The status of LAN(S) are shown in list.
Go to Main Menu > Networks > Network Traffic. The Network Traffic
interface is displayed.
To Next Page
Loading...