Honeywell 35 Series Network Video Recorder User Guide 
 
 
25 
 
Figure 28 Reset Password 
 
2.  Input the old password, and create a new password and confirm it. 
3.  Click APPLY to set settings. 
Resetting Password on Local Interface 
1.  Enter the Login interface. 
•  If you have configured unlock pattern, the unlock pattern login interface 
is displayed. Click Password, the password login interface is displayed. 
•  If you did not configure unlock pattern, the password login interface is 
displayed. 
2.  Click Forgot Password. Set the parameters according to the 
instruction on the pages. 
Figure 29 Password Reset 1 
 
3.  Set new password. 
In the New Password box, enter the new password and enter it again 
in the Confirm Password box.