Honeywell 35 Series Network Video Recorder User Guide
18
To prevent damage to the hard drive, follow these steps to shut down the
NVR:
1. In live view mode, right-click anywhere on the screen to display Main
Menu. Or click home menu icon at bottom of live view page to enter
the Main Menu page.
2. Go to Main Menu > System > Maintenance, click Shutdown. Or click
in the upper right corner and click Shutdown.
.
3. In the Shutdown window, click OK.
Device Initialization
• If it is your first time to use the device, set a login password of admin
(system default user) and a channel default password. You can select
to use unlock pattern to login as needed.
• Input the ask to recovery the password, there are many questions you
can choose three questions to ask.
• For your device safety, keep your login password of admin well after the
initialization steps, and change the password regularly.
1. Activate NVR.
Figure 16 Device Activation
To Next Page
Loading...