Honeywell 35 Series Network Video Recorder User Guide
60
Local Intelligent Analysis
This function is applicable for PoE NVRs only. It is not applicable for
non-PoE NVRs.
The local intelligent analysis is for NVR to manage the local intrusion
alarm.
1. Go to Main Menu > Event > Local Intelligent Analysis.
The Local Intelligent Analysis interface is displayed.
Figure 73 Local Intelligent Analysis
2. Configure parameters.
Table 22 Local Intelligent Analysis Parameters
Parameter Description
Enable Enable this function and then you can set the parameter of alarm.
Enable draw rect
Enable draw rectangle, the detection rectangle will be showed on
the live video of intrusion.
Mode Choose detection mode.
Channel
Choose the channels
Up to 4 channels to be chosen.
3. Click APPLY to complete settings.
If you enable or disable the intrusion and modify the channels, the
device will be reboot.
Intrusion
The intrusion refers to that an alarm is generated when the targets of
specified types (such as person, car, and both person and car) enter the
deployment area.
To Next Page
Loading...