Honeywell 35 Series Network Video Recorder User Guide
32
Parameter Description
Enable SSL
If the remote device is added through Onvif protocol, selecting
the SSL check box will provide encryption protection to the datatr
ansmitted.
To use this function, the HTTPS function should be enabled for
the remote IP camera.
Choose the protocol from the drop-down list, the protocol is set at
protocol management interface. The cameras should be confirmed to
c. Click OK.
The remote device information is displayed on the Added Device
list.
You can click to change the remote device information. Click to
delete remote device.
You can also add cameras on the live view interface by clicking on
the channel window.
UI local Update
You can upgrade the connected network camera firmware.
1. Plug in USB disk with the camera firmware.
2. Go to Main Menu > Camera > Camera. When the camera is online,
click .
Figure 37 Update Interface
3. Update the firmware of the connected cameras.
a. Select update file on the pop-up interface.
To Next Page
Loading...