Honeywell 35 Series Network Video Recorder User Guide 
 
 
55 
 
Figure 66 Intrusion   
 
2.  To configure the settings for the intrusion parameters, see Motion 
Detection. 
The intrusion function does not have detection area and sensitivity 
items. The detection area is configured in cameras interface, so the 
parameter can be copied. 
3.  Click APPLY to complete the settings. 
Multi Loitering 
When channel camera is capture someone stay in the setting area, it will 
trigger the intelligent analysis multi loitering alarm of NVR 
1.  Go to Main Menu > Event > Intelligent Analysis > Multi Loitering. 
The Multi Loitering interface is displayed. 
Figure 67 Multi Loitering   
 
2.  To configure the settings for the multi loitering parameters, see