Honeywell 35 Series Network Video Recorder User Guide
41
To backup recorded video file, you can set HDD as redundant HDD.
1. Go to Main Menu > Storage > Disk.
The Disk interface is displayed.
Figure 48 Disk Interface
2. Select an HDD and then select disk group the drop-down list.
3. (Optional) Format an HDD.
a. Select an HDD and then click FORMAT.
This operation will erase all data in the HDD. Proceed with caution.
If you format the HDD, the data will be lost.
b. Click OK.
4. Enable Recording overwrite, when the disk is full, it will overwrite.
5. Set Expired time(day), the expired time is not 0, the records will be
deleted when the time is over the setting value.
6. Click APPLY to complete the setup.
Storage Mode
When the NVR is installed several HDDs, you can configure the HDDS in
different groups, and the different HDDS can record the different
channels, so that users can access HDDS quickly and use the HDDs
efficient.
1. Go to Main Menu > Storage > Storage Mode.
To Next Page
Loading...