Honeywell 35 Series Network Video Recorder User Guide
40
•
Orange stands for MD&I/O (motion detection and I/O alarm)
record.
•
Select a record type and then left-click to set or click to set
all day or all week, but left-click again to clear the
corresponding period.
The color schedule is only for view, the recording of disk cannot show
these colors; There are only three types of recording .
Figure 47 Set Period by Drawing
Method 1: Hold down the left mouse button, drag and release mouse to
select the arming time within 00:00-24:00 from Monday to Sunday.
Method 2: Click in the record schedule page to select the whole day or
whole week.
Deleting record schedule: Click again or inverse selection to delete the
selected record schedule.
• When you select time by dragging the cursor, the cursor cannot move
out of the time area. Otherwise, no time would be selected.
• The selected area is blue. The default is all week.
• User can choose alarm type to record, if the chosen alarm is happening
at the setting time, it will record. So that it will using the disk effectively
to avoid repeating useless recording.
• The ANR function can be used only for the cameras with supplementary
recording function.
• User can set different alarms to record.
4. Click APPLY to complete the settings.
Enable auto record function so that the record plan can become
activated. Refer to Storage for detailed information.
Disk
You can view and set HDD properties, format HDD and view current HDD
type, status, capacity and etc. The operation includes format HDD, and
change HDD property (read and write/read-only/redundancy).
To Next Page
Loading...