CHAPTER
29
Performance Series Embedded NVR User Guide
3 LOCAL BASIC OPERATION
Slight difference may be found on the user interface. The following
figures are for reference only.
This chapter contains the following sections:
• Configuring Camera, page 29
• Configuring Storage Settings, page 38
• Configuring Events Settings, page 46
• Configuring Network Settings, page 61
• Configuring System Settings, page 76
• Configuring Live View Settings, page 91
• Playback, page 98
Configuring Camera
Camera
Adding Camera
When you connect a camera to the NVR via PoE port, NVR automatically
initializes the camera. The NVR can activate and create new passwords for
new cameras, the password is the same as the created channel password
(Figure 16 Device Activation
By adding remote devices to the NVR, you can view the video on the NVR,
and manage and storage the video file. Different series products support
different remote device amount.
1. Go to Main Menu > Camera > Camera.
To Next Page
Loading...