Honeywell 35 Series Network Video Recorder User Guide
37
Note:
Different series network camera displays different parameters. The
actual product shall prevail.
Table 15 Image Parameters
Parameter Description
Channel In the Channel list, select the channel that you want to configure.
Brightness Adjusts the brightness according to actual environment.
Sharpness Adjusts the sharpness according to actual environment.
Contrast Adjusts the contrast according to actual environment.
Saturation
Adjusts the color shades. The bigger the value, the lighter the color will
become. Adjusts the saturation according to actual environment.
3. Click APPLY.
OSD
1. Go to Main Menu > Camera > OSD. The OSD interface is displayed.
Figure 43 OSD
2. In the Channel list, select a channel to set OSD.
3. Enable Time to display. Enable Channel name to display and input
the channel name to distinguish different locations’ cameras.
The display box is displaying at top left of screen. Click and drag
display box of time(channel) to move to a specified location.
To modify the format of displaying time, go to Main Menu > SYSTEM >
General > Date And Time to set. Refer to Date And Time for detailed
information.
The channel name supports up to 32 characters
4. Click APPLY to complete settings.
To Next Page
Loading...