EasyManua.ls Logo

Honeywell HN35160200 - Motion Detection; Figure 56 IO Control Push

Honeywell HN35160200
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Honeywell 35 Series Network Video Recorder User Guide
47
Figure 56 IO Control Push
2. Enable IO Control Push, choose the Alarm in from drop-down list.
3. Choose Normal state from drop-down list (N/C or N/O).
4. Select Disable items (Push message to APP and Email)
Note:
If you select normally open and select the disabled items, the alarm
input 1 will not push message in the normally open state. Only when
the alarm in 1 is in the normally closed, it can push alarm message.
5. Click APPLY to save the settings.
Motion Detection
Motion Detection Settings
When the moving object appears and moves fast enough to reach the
preset sensitivity value, the system activates the alarm.
1. Go to Main Menu > Event >Motion Detection.
The Motion Detection interface is displayed.

Table of Contents

Related product manuals