Operation
Rev 3.01 86 Document 900.0258
10/05
Note The DVR is not recording if only the red LED on the REC button
is lit. When the DVR is set for Time-lapse or Event recording, the
red LED on the REC button indicates the unit is ready to record.
A red dot appears on the monitor when the clock reaches a
scheduled recording time and the DVR starts recording video.
Recording Audio
If the DVR was set up to record audio, it will record audio when video is recording.
Note Make certain you comply with all local and federal laws and
regulations when recording audio.
Playing Recorded Video
After video has been recorded, you can view it by pressing PLAY/PAUSE. When
playing video for the first time, the DVR displays the most recent image. When playing
video subsequent times, the DVR starts playing video from the last recalled image.
Note Only the administrator level user can view the covert cameras.
The covert cameras in the playback mode are determined by the
current camera setting.
To freeze the video on the screen, press PLAY/PAUSE again.
To Next Page
Loading...
Need help?
General