Honeywell HRHD4+ - Configuring On-Screen Display

Configuration
Rev 3.01 58 Document 900.0258
10/05
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Display Setup
Highlight the OSD, Main Monitoring, or Spot Monitoring in the Display menu (MENU ➤
Display ➤ OSD/Main Monitoring/Spot Monitoring), and then press # to set up the
on-screen display or camera display on the main monitor or spot monitor.
OSD (On-Screen Display) Setup
The DVR can be set up to display Date, Time, Title and Status on screen. Each feature
can be turned on or off and you can adjust the margins.
Figure 3-40 OSD Setup Screen
1. Highlight the box beside Date and then press # to toggle the date display On and
Off.
2. Highlight the box beside Time and then press # to toggle the time display On and
Off.
3. Highlight the box beside Title and then press # to toggle the camera title display
On and Off.
4. Highlight the box beside Status and then press # to toggle status display On and
Off.