Configuration
Rev 3.01 72 Document 900.0258
10/05
Password Setup Screen
An Administrator password is required to:
• Turn the system off
• Enter the setup screen
• Load default setups
• Clear all data
• Change system date and time
• Change the Administrator password
A User password is required to:
• Enter playback, fast forward playback, and fast backward playback modes from
Live Monitoring mode.
• Enter the search menu screen in Live Monitoring mode and setup screens
(access only to Clip Copy setup screens).
Press ALARM to display the event log in Live Monitoring mode unless there is an active
alarm.
Highlight Password in the Main menu (MENU
➤ Password) and then press # . The
Password screen displays.
Figure 3-52 Password Setup Screen
1. Highlight the box beside User and then press # to toggle between On and Off.
If the password is set to On, you will be asked to enter the current password so
that you can turn it Off.
If the password is set to Off, you will be asked to enter the new password and to
confirm it before it will be turned on.
2. The Administrator password cannot be turned on and off. You can change the
Administrator password by first entering the current password, entering a new
password, and then confirming the new password.
To Next Page
Loading...
