Configuration
Rev 3.01 28 Document 900.0258
10/05
Figure 3-8 System Upgrade Screen
Caution System upgrade via USB port might not be completed properly if
a USB device has been connected to the other USB port. Please
remove any other USB device before system upgrade is
attempted.
Note If the file system on the USB-IDE hard disk drive or USB Flash
drive is not FAT16 or FAT32 format, format the drive using FAT16
or FAT32 format.
Date/Time Setup
Highlight Date/Time in the System menu (MENU ➤ System ➤ Date/Time) and then
press # . The Date/Time setup screen displays.
Figure 3-9 Date/Time Screen
To Next Page
Loading...
