Configuration
Rev 3.01 76 Document 900.0258
10/05
4. Highlight the box beside Working From/Working To and then press # to set up
the time span of the automatic archive.
5. To save your changes, highlight OK and then press # . Select Cancel to exit the
screen without saving changes.
6. Select Manual to display a screen where you setup manual archive parameters.
Figure 3-56 Manual Archive Screen
7. Highlight the boxes beside From and To and then press # to set up the archive
start and stop times and dates.
8. After you set the archive start and stop parameters, highlight Archive Now and
then press # .
9. To end the archive process at any time, highlight Stop and then press # .
Note The Stop button only displays during archiving.
Note If you have a large quantity of recorded video to archive, either
stop recording or reset the recording speed. The oldest date to
be archived might be overwritten if the hard disk is full.
To Next Page
Loading...
