Configuration
Rev 3.01 50 Document 900.0258
10/05
Alarm In Event Action (Record) Setup Screen
The DVR can be set to react to events differently. Each sensor can be assigned a
schedule, camera, recording speed, video quality, and dwell time.
Figure 3-31 Alarm In Event Action (Record) Setup Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier (see Time-Lapse Recording Schedule, page 48).
2. Highlight the Camera box and then press # . A camera selection screen display.
Select the camera number you would like to associate with the sensor.
Note You can associate multiple cameras with a sensor.
3. Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
4. Highlight the Quality box and select the image quality you want to record from the
drop-down list.
5. Highlight the Dwell box and set the length of time you would like to record for the
associated event.
To Next Page
Loading...
