Configuration
Rev 3.01 21 Document 900.0258
10/05
Turning on the Power
Connect the power cord to the DVR to turn on the unit. The DVR takes approximately
60 seconds to initialize.
REC (Record) • Set the DVR so that it is ready to record video. A red dot appears on the
screen when the DVR is recording video. Press REC again to stop recording
video. This operation can be an admin password protected.
• Load a Preset View in PTZ mode
Shuttle Ring The Shuttle Ring only functions in Playback mode. The Shuttle Ring is spring
loaded. When released, the video pauses and the ring returns to the center
position. Turn the ring clockwise to play video forward. Turn the ring
counterclockwise to play video backward.
Playback speed varies with the amount the ring is turned. The playback speeds are
"x0.5, "", """, """", !x0.5, !!, !!!, and !!!!.
Jog Dial The Jog Dial only functions when playback video has been paused. Turn the Jog
Dial clockwise to play video forward image-by-image. Turn the Jog Dial
counterclockwise to play video backward image-by-image.
Table 3-1 Front Panel Controls
Front panel
control
Press the button to … (cont’d)
Shuttle Ring
Jog Dial
To Next Page
Loading...
