Honeywell MA Series - 1.5.5 Zone Fault Event Condition; Zone Fault Screen Display and Navigation; Zone Fault Details and Device Information

MAx panel Fire Detection System
M-167.3-Serie-MA-EN / 11.2021 13
1.5.5 Zone fault event condition
The following display appears when the control panel is in zone fault condition. Fault events are also initially
displayed for the zone.
4
3
02
1
2

Zone with fault events

Text programmed for this zone

Counter for faulty zones

Zone virtual LED on
5
02
1
3
2
4
Pressing
on the escape button
or leaving the keypad
inactive for 30 seconds will allow you
to
return to the
list of faulty areas.

Detail of the device in fault condition

Text programmed for the device

Fault type description

Counter for faulty zones

Zone virtual LED on
Fault display in stand
-by condition