MAx panel Fire Detection System
4 M-167.3-Serie-MA-EN / 11.2021
1 General / Application
These operation instructions are intended to complement the explanations of your fire alarm installer and
provide you with concise and comprehensive information on the operation of the fire alarm control panel
MAx series MA-1000, MA-2000 and MA-8000. We recommend that you read these operating instructions
carefully and keep them with the technical documents of the fire alarm control panel (FACP). If you have any
questions, please contact your fire alarm installer.
This documentation describes all displays, indicators and operating elements that are relevant for the operation
of your fire alarm control panel.
The compact, microprocessor-controlled FACP is used for early fire detection, chiefly in small- to medium-sized
buildings, with fire detectors based on addressable detector. The FACP technology represents the state of the
art in early fire detection.
The use of intelligent fire detectors on a short-circuit and fault-tolerant loop guarantees reliable early detection
of fires.
Thanks to the clear design of the product, the instructed person will be able to quickly and easily operate the
functions of the panel. The operating state of each detector zone, such as fire, fault or shut-off is indicated by a
separate single detector zone indicator unit on the operating panel.
This manual refers to functions available in the software revision shown on the cover.
1.1 Associated Documents
Part No. Description
M-167.1-MA1000-EN Installation Manual MA-1000
M-167.1-MA2000-EN Installation Manual MA-2000
M-167.1-MA8000-EN Installation Manual MA-8000
M-167.2-SERIE-MA-EN Commissioning Manual MAx panel Fire Detection System
M-167.3-SERIE-MA-EN Operation Manual MA-1000, MA-2000, MA-8000
M-167.4-SERIE-MA-EN Quick Start Guide MA-1000, MA-2000, MA-8000
M-167.5-SERIE-MA-EN Configuration tool MA-1000, MA-2000, MA-8000
M-167.6-MA-LCD7-EN Operating and Installation Manual MA-LCD Repeater
To Next Page
Loading...
