Honeywell MA Series - 4.1 Utility - Active Module List; Viewing Active Input Modules; Viewing Active Output Modules

MAx panel Fire Detection System
22 M-167.3-Serie-MA-EN / 11.2021
4.1 UTILITY – ACTIVE MODULE LIST
You can use this function to examine the lists of active modules that are connected to the control unit lines.
Input modules
Active input modules are displayed as follows:
The following comment is provided for
a line where there are no
alarm input modules:
"No active input module"
Output modules
Active output modules are displayed as follows:
The following comment is provided when there are
no active
output modules in a line
as shown in the figure below:
“No
output module active”