MAx panel Fire Detection System
M-167.3-Serie-MA-EN / 11.2021 9
1.5 USER INTERFACE DESCRIPTION
Functions and access levels
Functions EN 54 level Factory default password
Alarm and faults recognition
Delay reset (appropriate button)
Excluded zones/points display
1.5.1 Description of using the keyboard to enter data in the programming folders
Use the arrows to enter the adjacent folders (displays).
Use the arrows to scroll through the fields inside the folder (the selected field is displayed with the
characters in REVERSE).
If the folder has an index field, the first two function buttons appear and can be used for scrolling.
The selected field can be changed by making an entry in editing mode using the enter button .
There are different editing modes depending on the type of data:
• Text entry (CBE, labels associated with devices, zones, etc.)
Use the keyboard displayed on the touch screen to enter alphanumeric characters.
• Alphanumeric keyboard displayed on the touch screen:
This keyboard will be available on the touch screen when a programmable text needs to be edited:
Selections (TYPE ID, YES, NO, etc.): press ENTER and use the arrows to scroll through all the selectable
labels in sequence.
The parameter is saved using the enter button .
If you do not want to save the changes, use the escape button .
To exit the folder system, use the escape button .
To enter passwords, when they are requested, use the numeric keyboard that appears on the screen. Confirm
the entered password by pressing the ENTER button.
is entered, the following
yed: “Invalid password! xxxxx"
xxxxx” is a five-character code.
the programmed password has been forgotten,
Honeywell technical service by
.
To Next Page
Loading...
