Honeywell MS9540 - RS232 Communication Mode; Load Keyboard Wedge Defaults

26
SCANNER OPERATION
CONFIGURATION MODE OPTIONS
³118117
Allow Configuration Mode on Power Up - the
scanner can only enter MetroSet mode before any
bar codes are scanned.
³118107
* Allow Configuration Mode Anytime - Allow
MetroSet configuration at any time.
³118116
Allow configuration Codes on Power Up - Once
a product bar code is scanned after power-up, the
scanner will not accept configuration bar codes.
³118106
*
A
llow Configuration Codes Anytime - Allows
scanning of configuration bar codes at any time.
SCAN BUFFERS
³318000
* 1 Scan Buffer - The scanner will scan one bar
code in the scan field and not scan again until the
bar code is removed from the scan field for the
duration of the same symbol time out.
³318010
2 Scan Buffers - The scanner will scan 2 bar
codes in the scan field one time each. These 2 bar
codes will not be scanned again and until they are
removed from the scan field for the duration of the
same symbol time out.
³318020
3 Scan Buffers - Same function as 2 Scan Buffers,
but 3 bar codes are in the scan field.
³318030
4 Scan Buffers - Same function as 2 Scan Buffers,
but 4 bar codes are in the scan field.