85
MS9535-5M VOYAGERBT
®
³123910
Enable Inventory Mode – Bar code data that is
scanned is stored in the scanner’s expanded
memory base. The data will be transmitted when the
scanner is placed back into its Bluetooth cradle.
A special beep will sound when a bar code is
scanned but not
stored due to a full a
memory base. The scanner must be placed
in the Bluetooth cradle to empty the memory.
³123900
* Disable Inventory Mode
³123903
* Auto Cradle Transmit - All bar code data is
automatically transmitted when the scanner is
placed into the Bluetooth cradle.
³123913
No Cradle Transmit - The scanner will not
automatically transmit bar code data when placed in
the Bluetooth cradle.
³123901
* Transmit Inventory FIFO - Data is transmitted on
a first-in, first-out basis.
³123911
Transmit Inventory LIFO - Data is transmitted on a
last-in, first-out basis.
³123912
Enable Inventory Beep - A beep will sound as each
bar code is transmitted. A special audible indicator
will sound on completion of data transfer.
³123902
* Disable Inventory Beep
³123904
* No Transmit/Entry Counter
³123914
Transmit/Entry Counter - Optional field transmitted
with the bar code data that is a count of the number
of transmissions used to transmit the entire buffer.
To Next Page
Loading...
