79
MS9520 VOYAGER
®
& MS9540 VOYAGERCG
®
SERIES
LASER/SCAN MODES
³418304
* Normal Scan - Laser turns on after the IR senses a
bar code. The laser remains on for approximately 3
to 10 seconds.
³418324
Blinky Scan - Laser turns on after the IR senses a
bar code. The laser will blink on/off for
approximately 60 seconds.
³418334
Continuous Blinky Scan - The laser blinks
continuously and the IR is inactive. This feature is
not available for the VoyagerPDF series.
³418344
Custom (One Shot) Scan - The laser turns off
after a good decode.
³418354
Enable Manual Activation Mode - The laser
activates when the CodeGate button is pressed.
³120000
* Normal Timeout (Button Act)
³120010
0.5 Second Timeout (Button Act)
Note: MS9520 models from Rev H and beyond will be equipped with limited
PDF scan/decode capability. Please refer to the section titled, MS9524 &
MS3544 VoyagerPDF Series for configuration bar codes. Unlike the
MS9544 and the MS9524, PDF reading is not a factory default and must
be enabled before attempting to use.
To Next Page
Loading...
