64
LIGHT PEN PARAMETERS
³415524
Enable Light Pen Mode - Select this option if the
scanner will be used in place of a light pen. It
provides light pen emulation of each bar code
scanned.
³116917
* Bars High
³116907
Spaces High
³116916
Transmit as Code 39 - All bar codes will be
decoded then transmitted as Code 39 bar codes.
³116906
* Transmit as Scanned - All bar codes will be
decoded and transmitted in that symbology.
³116915
Poll Light Pen Source - The scanner waits for an
active source voltage before transmitting data.
³116905
* Do Not Poll Light Pen Source.
³116911
Enable Inverted IDLE/Extra Toggle - The scanner
beeps and toggles the light pen data line with an
extra data pulse to condition the decoder.
³116901
* Disable Inverted IDLE/Extra Toggle.
³116910
Enable Pre-Transmit Toggle of RTS Line
³116900
* Disable Pre-Transmit Toggle of RTS Line
To Next Page
Loading...
