Honeywell MS9540 - Scanner Scan Buffers

31
SCANNER OPERATION
DATA TRANSMISSION DELAYS
Use these codes to select the amount of delay between sending data characters
from the scanner to the host. This helps prevent the scanner from overflowing
host-input buffers.
³818810
* 1 msec Intercharacter Delay
³8188100
10 msec Intercharacter Delay
³8188250
25 msec Intercharacter Delay
³918800
~
V
ariable msec Intercharacter Delay - Scan this
bar code and a sequence of code bytes (on page 70)
to set the delay between characters sent to the host
system (range from 1 to 255 msecs.).
³818800
No Intercharacter Delay
³919300
~ Variable Inter-Record Delay
³119317
Turn Off Laser During Inter-Record Delay
³119307
* Leave Laser On During Inter-Record Delay