84
MS9535 VOYAGERBT
®
³8195300
Sleep in 5 Minutes - The scanner will go into sleep
mode after the laser has been off for 5 minutes.
³8195600
Sleep in 10 Minutes - The scanner will go into sleep
mode after the laser has been off for 10 minutes.
³123907
* Enable Scanning in Cradle
³123917
Disable Scanning in Cradle
³123711
Enable In Stand Error Audio Indicator –
Activates an audible indicator the when Bluetooth
scanner is in-the-stand/charging cradle but is not
making contact via the battery terminal contacts.
³123701
* Disable In Stand Error Indicator
³123702
* Enable Cradle LED
³123712
Disable Cradle LED
³123707
Enable Range Gate - Store scanned barcodes into
RAM if the Bluetooth connection has been
interrupted.
³123717
* Disable Range Gate
³123716
Enable Bluetooth Test - The cradle will display
certain connection information ( KO, OK, etc.)
Do not enable this feature unless
instructed to by a Metrologic representative.
³123706
* Disable Bluetooth Test
To Next Page
Loading...
