Code 39
Check Character
Required – When enabled, the check character is required. Default is disabled.
Transmit – When enabled, the check character is transmitted. Default is
disabled.
Transmit Start / Stop Character – When enabled, the start / stop characters
are transmitted. Default is disabled.
Full ASCII – When enabled, full ASCII interpretation is used. Default is
disabled.
Append – When enabled, append and buffer codes that start with a space.
Default is disabled.
EAN 8
Transmit Check Character – When enabled, transmit the check character.
Default is enabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is
disabled.
Read 5-Digit – When enable, transmit the 5 digit addenda. Default is disabled.
Required – When enabled, only transmit bar codes with a 2 or 5 digit addenda.
Default is disabled.
Insert Separator – When enabled, insert a space between the code and
addenda. Default is enabled.
6-22
To Next Page
Loading...
