EAN 13
Transmit Check Character – When enabled, transmit the check character.
Default is disabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is
disabled.
Read 5-Digit – When enable, transmit the 5 digit addenda. Default is disabled.
Required – When enabled, only transmit bar codes with a 2 or 5 digit addenda.
Default is disabled.
Insert Separator – When enabled, insert a space between the code and
addenda. Default is disabled.
Note: A UPCA decoding algorithm will also decode EAN 13 labels. For
correct operation, either disable the UPCA symbology when using
EAN 13 labels or configure the UPCA settings to match the EAN 13
settings.
Interleaved 2 of 5
Check Character
Required – When enabled, the check character is required. Default is
disabled.
Transmit – When enabled, the check character is transmitted. Default is
disabled.
6-23
To Next Page
Loading...
