Honeywell MX9 - Page 220

Mesa
UPCA – When enabled, decode UPCA Mesa. Default is disabled.
EAN13 – When enabled, decode EAN 13 Mesa. Default is disabled.
Code39 – When enabled, decode Code 39 Mesa. Default is disabled.
Code128 – When enabled, decode Code 128 Mesa. Default is disabled.
Interleaved 2 of 5 – When enabled, decode Interleaved 2 of 5 Mesa. Default
is disabled.
Code93 – When enabled, decode Code 93 Mesa. Default is disabled.
When the Mesa symbology is chosen on the Symbology panel (the Enable
checkbox is checked) the Advanced button must be clicked and the desired
Mesa Advanced Properties sub-symbology selected.
When Mesa is disabled on the Symbology panel (the Enable checkbox is
cleared), click the Advanced button and uncheck all parameters or sub-
symbologies, on the Mesa Advanced Properties panel.
Note: The root symbology (UPCA, EAN13, Code39, Code128, Interleaved
2 of 5 and/or Code 93) must be enabled before the matching enabled
Mesa sub-symbology will decode.
MSI Plessy
Transmit Check Character – When enabled, transmit the check character.
Default is enabled.
OCR See Also: "OCR Symbology"
6-24