10 NFS2-640/E Programming Manual — P/N 52742:L2 7/17/14
General Information Introduction to the Control Panel
1.2.4 Shortcuts to Operating Functions
To the left of each program function, you’ll find a keypad shortcut, which contains
a series of keypad entries required to access the program function. All shortcuts
start with the control panel in normal operation.
For example, the keypad shortcut to the left shows how to enter the Read Status
function with the control panel in normal operation.
1.3 Introduction to the Control Panel
The NFS2-640 is an intelligent, field-programmable Fire Alarm Control Panel. Field-programming
the control panel lets you customize the fire alarm system by selecting and setting program options
for intelligent/addressable detectors and modules, and Notification Appliance Circuits (NACs).
This manual provides information for programming using the NFS2-640 keypad connected to the
control panel. VeriFire™ Tools must be used for programming if no keypad is used, or if a network
control annunciator is used as the keypad in either a network or standalone application. Refer to
VeriFire™ Tools for information on programming without the NF2S-640 keypad, and the NF2S-
640 Installation Manual and NCA-2 Manual for installation information.
For details on control panel operation, refer to the NFS2-640 Operations Manual.
The NF2S-640 provides two methods for field-programming the control panel:
• Using the built-in “Program Change” interface
• The VeriFire™ Tools Programming Utility
AFM-16A Annunciator Fixed Module Manual 15207
ACM-8R Annunciator Control Module Manual 15342
LCD-80 Manual 15037
LCD2-80 Manual 53242
FDU-80 Remote Annunciator Manual 51264
LDM Series Lamp Driver Annunciator Manual 15885
SCS Smoke Control Manual (Smoke and HVAC Control Station) 15712
FireVoice-25/50ZS & FireVoice 25/50ZST Manual 52290
FirstCommand Emergency Communication System LS10001-001NF-E
RPT-485W/RPT-485WF EIA-485 Annunciator Loop Repeater Manual 15640
DPI-232 Direct Panel Interface Manual 51499
TM-4 Installation Document (Reverse Polarity Transmitter) 51490
UDACT Manual (Universal Digital Alarm Communicator/Transmitter) 50050
UDACT-2 (Universal Digital Alarm Communicator/Transmitter) Listing Document 54089LD
UDACT-2 Manual (Universal Alarm Communicator/Transmitter) 54089
ACT-2 Installation Document 51118
RM-1 Series Remote Microphone Installation Document 51138
RA100Z Remote LED Annunciator Installation Document I56-0508
Table 1.3 Related Documentation (2 of 2)
To Next Page
Loading...
Need help?
General
