Honeywell Notifier NFS2-640/E - Index

121 NFS2-640/E Programming Manual — P/N 52742:L2 7/17/14
Index
A
Abort Switch 28, 29, 60
basic configuration example
63
configuration example with monitor mod-
ule
74
Definition
62
how it works
62
to program
62, 74
Type Code (ULI,IRI,NYC, or AHJ)
60
AC delay enable
32
Acclimate, detector sensitivity settings
101
ACS Annunciation, releasing applications
91
ACS annunciators
ACS Selection Groups A through W
35–
41
annunciation points
34
annunciator display
34
Selection Groups, global setting
32
selection of display information
33
AHJ Abort Switch
example
69
programming
68
Alarm
Alarm Verification Timer
31
Scroll
48
to select sensitivity
101
Alarm Verification Counters. See Detector head-
ings.
55
Alarm Verification Timer
31
annunciation points
34
Argument
108
Auto Silence Timer
31
Autoprogram
14, 15–18
default values
18
to add/remove device
16
to create a new program
15
Auxiliary Control Functions, releasing applica-
tions
91
B
BACKUP option switch for NACs 60
Basic Program
13, 14–47
Baud rate
CRT Serial Port
51
Printer Serial Port
50
Beam, detector sensitivity settings
101
Blink rate for SLC device LED
32
C
California Code 28, 94
Canadian Two-Stage
94
Caution
Definition
8
Do not program detectors as CLIP...
50
Do not program more than 99 CLIP...
50
CBE (Control-By-Event)
106–109
example
109
CBE list
20, 92, 93
Check option (program errors)
47
Clear memory
15
CLIP (Classic Loop Interface Protocol)
13, 49
Coding Function Selections
94
Coding, Special Zone F8
18, 28, 30, 93
Control Module
to program
23
Cooperative Multi-Detector Sensing
98
Cross Zone
28, 29, 60
programming example
71
to activate a Releasing Zone
70
Types
70, 71
Custom label
20
D
DCC Mode 49
Default values, autoprogram
18
Delay Timer
28, 29, 60
to program
61
Detector
Alarm Sensitivity Levels
97
Initialization and System Testing
110
Pre-Alarm Sensitivity Level
97
Print a Detector Maintenance Report
104
Program Values
20
to Access Detector Maintenance Informa-
tion
103
to change sensitivity level
52, 54
to clear alarm verification counters
52, 55
to disable programmed points
52
to manually initialize
111
to program point
20
to replace
110
to Test Detectors Set Below 0.50% Obscu-
ration per Foot
102
Detector Initialization
110–111
Device
to add
16
to remove
17
Drift Compensation
95
graphic representation
96
E
Equations
Argument Entries
108