SPYDER MODEL 5 ENGINEERING TOOL – USER GUIDE
31-00282ES-01 32
Online Engineering
Online engineering includes the following steps:
• Connect to the BACnet network
• Discover devices on the BACnet network
• Create/change/ application and hardware layout if necessary
• Depending on the synchronization status, apply any of the following actions:
o Learn from controller
o Teach to controller
o Clear project
o Clear controller
For detailed descriptions, please refer to the corresponding sections:
• Working with Applications – The IRM Program, p. 45
• Teaching to Controller, p. 82
• Learning from Controller, p. 83
• Clearing Project, p. 85
•
To Next Page
Loading...
