Honeywell Spyder 5

SPYDER MODEL 5 ENGINEERING TOOL – USER GUIDE
9 31-00282ES-01
System Architecture
The following schematic shows an example for a BACnet MSTP based system containing a CIPer Model 50 controller as
a router and 3 IRM (Spyder Model 5) controllers for room control. The system is engineered using the Spyder Model 5
Engineering Tool based on the WEBStation N4.4 or higher.
Fig. 1. System Architecture based on Spyder Model 5 Engineering Tool, Spyder Model 5 and CIPer Model 50
Controllers