Honeywell ST 700 - Device Configuration and Parameter Descriptions; Table 36 - HART Transmitter Parameters

Revision 4.0 ST 700 Series HART/DE Option User’s Manual Page 131
Alternately you can access the full EDDL features by selecting the My Device Tab
Navigate through the menus to access various functions. See Table 12 for lists all the parameters in
the ST 700.
16.2.9 Device Configuration and Parameter Descriptions
Table 36 lists descriptions of all parameters for a HART Transmitter with the Online tab menu path.
The same parameters may be accessed via the Shortcuts menu under the My Device tab.
Table 36 – HART Transmitter Parameters
Online Menu Flow
Parameter menu/
name
Description/Valid values
Online/Overall Status
Displays a pictorial representation of the current
device status
Online/Honeywell
Logo
Photograph of an ST 700 Pressure Transmitter along
with the official “Honeywell” logo
Online/PV Meter
Displays a gauge meter representation of the current
value of the Primary Variable (pressure input)
Online/PV
Displays the current value of the Primary Variable
(pressure input) in user selected engineering units
Online/SV Meter
Displays a gauge meter representation of the current
value of the Secondary Variable (meter body
temperature)
Online/SV
Displays the current value of the Secondary Variable
(meter body temperature) in user selected
engineering units
Online/AO Meter
Displays a gauge meter representation of the current
value of the Analog Output
Online/PV AO
Displays the current value of Analog Output in mA