Honeywell ST 700 - HART DD binary file format compatibility matrix for ST 700 Standard Transmitter

Revision 4.0 ST 700 Series HART/DE Option User’s Manual Page 169
20.5.1 Device Health:
Shows Overall Device Status Image and Device Status button/Link that takes you to the Device
Status screen.
Overall Device Status will be either Normal, Warning or Failure depending upon the health of the
device:
Overall Device Status will be shown on each of the DTM pages so that the user can get
the current status of the device from any screen
20.5.2 Device Icon / Honeywell Logo:
Displays the Honeywell Logo, Transmitter icon.
20.5.3 Process Variables:
Shows Primary variables Gauges and their values, LRL, URL.
20.5.4 Shortcuts:
Device Setup:
 Provides Tabs to access any of the functions : Basic Setup, Calibration, Process Variables,
Device Status, Diagnostics, Services, Detailed Setup, Meter Body Selections, Display Setup
and Review
Basic Setup:
 Provides Device Setup information (Tag, Device Type, MB Type etc.)
Calibration:
 Provides access to all the Calibration functions
Refer to Table 36 for more details