Honeywell ST 700 - Power up Diagnostics; Table 50 - Power up Diagnostics

Page 160 ST 700 Series HART/DE Option User’s Manual Revision 4.0
18.2.11 Power Up Diagnostics
Table 50 – Power Up Diagnostics
Pwr fail
counter
Parameter
Description
Total number of power-ups
experienced by the unit.
Set-up
None: initialized to zero prior to
leaving factory.
NVM
Update every 8 hours.
Note
Only one power failure in each 8 hour
period is counted.
Time since
last power fail
Method
Description
Displays time since last power-up in
minutes.
Set-up
None.
NVM
Update every 8 hours.