Honeywell ST 700 - 18 HART Advanced Diagnostics for ST 700 Basic Transmitter; About this Section; Advanced Diagnostics; Install Date

Page 152 ST 700 Series HART/DE Option User’s Manual Revision 4.0
18 HART Advanced Diagnostics for
ST 700 Basic Transmitter
18.1 About This Section
This section provides information about the Advanced Diagnostic features in the ST 700 Basic
SmartLine Pressure Transmitter.
18.2 Advanced Diagnostics
Table 38 – Viewing Advanced Diagnostics
What you want to view
What to do
 Install date
 PV (Process Variable) Tracking
Diagnostics
 SV (Meter Body Temperature
)Tracking Diagnostics
 TV (Static Pressure) Tracking
Diagnostics (DP transmitters only)
 ET (Electronics Temperature) Tracking
Diagnostics
 Stress Life
 Service Life
 Operating Voltage Tracking
Diagnostics
 AVDD (Sensor Supply Voltage)
Tracking Diagnostics
 Sensor CPU Temp. Tracking
 Power Up Diagnostics
Click Start/FDC to Launch the FDC application
on the MC Toolkit.
On the homepage, click Online and establish
connection with the device.
Click My Device\Diagnostics\Adv
Diagnostics.
18.2.1 Install Date
Install Date
Parameter
Description
Date of device installation. Date displayed in mm/dd/yyyy
format where mm=month, dd=day, yyyy=year
Set-up
User enters a date once during device lifetime. Once
date is entered no further updates are possible and value
becomes read only and is permanently saved.